Ending A Call; Activating Or Deactivating The Keypad Lock; After Leaving The Radio Network - Siemens HiPath 4000 Operating Manual

Step by Step
a

Ending a call

k
Press the On-hook key briefly or place the handset in
or
the charging shell.
The call charges are displayed, depending on the com-
munication system.
Activating or deactivating the keypad
lock
This feature protects against accidentally pressing but-
tons when the handset is in a pocket, for example. The
keypad lock turns off automatically when a call comes
in and turns back on when the call has ended.
#
Press the hash key until the activation or deactivation is
confirmed by a crescendo tone sequence.
A key icon on the display indicates that keypad lock is
active.
Note:
You can dial a pre-programmed emergency
number when the keypad is locked.

After leaving the radio network

The base name flashes on the display. The handset re-
peatedly attempts to synchronise with a base. The in-
tervals between synchronisation attempts increase on
account of the integrated power saving function.
You can switch off your handset to save the battery
pack.
Conducting calls – the basic functions
9