Using A Different Telephone In The Same Way As Your Own; Logging On To A Different Telephone - Siemens optiPoint 500 entry Operating Instructions Manual

Step by Step
FA
or
or
Ente r th e code !
E
Ente r th e code !

Using a different telephone in the same way as your own

Using a different telephone
in the same way as your own
You can log on to another telephone belonging to the Hi-
com system by means of a personal identification num-
ber (PIN) (as of software status HiPath 40 00, Version 1 .0
und Hicom 300 E/300 H, and also telephones of net-
worked HiPath 40 00 systems, e.g . at other branches of
your company). At the other telephone you can then:
• make calls and assign the charges to cost centres
• use your individual speed dialling numbers and also
a number which has been stored at your own tele-
phone for the p urpose of redialling .
In addition, you can have your calls d iverted to a tele-
phone in the office or department where you will be for
a temporary period ("call forwarding - follow me").

Logging on to a different telephone

Precondition: You have been assigned a PIN by Sys-
tem Support. You require an internal PIN for calls within
your own HiPath 400 0 system, while for calls involving
other HiPath 40 00 systems in the integrated network
you require a "network-wid e" PIN.
F>:
UK code or Standard code (for PIN 1).
Enter the code for additional PIN.
Entering the PIN for your own HiPath 400 0 system
area:
E
Enter internal PIN.
or Entering the PIN for another HiPath 400 0 system
area within the integrated network:
Enter the 2-digit node code for your own HiPath 40 00
system (enquire with System Sup port).
EG
Enter your own number and press the square key.
EG
Enter the network-wid e PIN and press the square key.
33 33 33 33