Runco VIDEO XTREME VX-22D Installation & Operation Manual page 21

8. SOFT POWER BUTTON
Press once to turn on the VX-22d. Press it again to put the projector into Standby
mode. For a discrete on or off command, you can use the direct access buttons on
the remote control (see Figure 2-5).
9. PATTERN BUTTON
Press PATTERN to access the internal test pattern menu. Use arrow keys to select a
pattern and press SELECT to confirm. Press PATTERN again to return to the
selected source.
10. POWER INPUT (100 to 240 VAC)
Connect the VX-22d to power here.
11. SERVICE PORT
For use by authorized service personnel only.
12. USB-B
High-speed service port (for future use).
13. DVI-DL (Dual-Link)
An HDCP-compliant, dual-link digital video input for connecting the output from the
DHD Controller.
14. SELECT BUTTON
Press SELECT to confirm your selection of a highlighted choice on the On-Screen
Display (OSD).
15. MENU BUTTON
Pressing the MENU button brings up the main VX-22d menu. Also, if you are in an
adjustment mode or function, pressing MENU brings the menu back one level.
Runco VX-22d Installation/Operation Manual 7
Controls and Functions