Yamaha FZS1000 2003 Supplementary Service Manual page 16

F Fasten the clutch cable with a steel clamp.
G Route the all leads on the shift shaft.
H Route the fuel sender lead inside of the seat rail.
I Route the battery negative lead forward of the
frame stay.
J Route the wire harness around inside of the rear
fender rib.
K Fasten the wire harness, sidestand switch lead and
oil level switch lead to the frame with a plastic
clamp. Do not fasten the A.C. magneto lead coupler
(white).
L Route the starter motor lead and battery negative
lead inside of the clamp.
M Route the all leads outside of fuel hose.
N Route the fuel hose the clamp of the frame.
CABLE ROUTING
O Fasten the sidestand switch lead, oil level switch
lead, A.C. magneto lead, starter motor lead, battery
negative lead and air filter case drain hose with a
plastic clamp.
P Fasten the sidestand switch lead, oil level switch
lead, A.C. magneto lead and air filter case drain
hose with a plastic clamp.
Q Clamp the sidestand switch lead to the frame.
R Route the air filter case drain hose through inside
the sidestand switch lead, and put end of the hose
backward.
S Fasten the sidestand switch lead to the frame with a
clamp.
T Fasten the sidestand switch lead and oil level switch
lead with a plastic clamp. Do not crush the air filter
case drain hose.
–8–
SPEC