Yamaha FZS1000 2003 Supplementary Service Manual page 12

Fuel pump lead
1
Fuel pump
2
EXUP cable
3
Carburetor heater hose
4
Right handlebar switch lead
5
Throttle cable 2
6
Throttle cable 1
7
Radiator fan motor lead
8
Coolant reservoir tank over flow hose
9
Fuel tank drain hose
10
Fuel tank breather hose
11
White paint mark
12
Rear brake light switch lead
13
Neutral switch lead
14
Speed sensor lead
15
Pickup coil lead
16
CABLE ROUTING
Handlebar upper bracket
17
Brake hose guide
18
Front brake hose
19
A Fasten the fuel pump lead, pickup coil lead, neutral
switch lead, speed sensor lead, rear brake light
switch lead and fuel pump with a plastic clamp.
Pass the clamp tip between the frame and rear
fender and point it to the downward.
B Fasten the fuel hose, pickup coil lead, neutral switch
lead and speed sensor lead with a plastic clamp un-
der the fuel hose. Place the fitting part on the up-
ward.
C Put the EXUP cable into the air box cover.
D Clamp the throttle position sensor lead to the carbu-
retor with a steel clamp.
–4–
SPEC