Connections To The Vx-8D And Dhd Controller; Connector Panel Access; Connecting The Dhd Controller To The Vx-8D - Runco VIDEOXTREME VX-8D Installation & Operation Manual

Proceed as follows to connect the DHD Controller to the VX-8d, your video sources,
external controller(s) – if present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
To access the connector panel, pull firmly
on the cable access cover to open it.
Digital Video Connection: Connect the HDMI Output of the DHD Controller to the DHD
Input of the VX-8d as shown in Figure 3-10.
Figure 3-10. Connecting the VX-8d to the DHD Controller
Runco VX-8d Installation/Operation Manual
RS-232
RS-232
DHD INPUT
INPUT DHD
HDMI
OUT
AC
AC
RS-232
OUT
29
Installation
3.6
Connections to the
VX-8d and DHD
Controller

Connector Panel Access

Connecting the DHD
Controller to the VX-8d