Installing The Autoscope Lens Motor (Vx-8D/Cinewide With Autoscope); Vx-8D/Cinewide With Autoscope Motor Assembly - Exploded View - Runco VIDEOXTREME VX-8D Installation & Operation Manual

Installation
Installing the AutoScope
Lens Motor
(VX-8d/CineWide with
AutoScope)
➤
Figure 3-6 shows the VX-8d/CineWide with AutoScope motor assembly.
Screw, Phillips Pan-Head,
10-32 x 3/8" (12x)
AutoScope
1
Lens Motor
Figure 3-6. VX-8d/CineWide with AutoScope Motor Assembly – Exploded View
Remove Projector Front Feet: Place the projector upside down on a blanket or other
soft surface. Loosen and remove the two front feet on the projector.
Install Ceiling Mount Adapters/Projector Stands: For ceiling installations, the
adapters bring the attachment points for the projector mounting rails (included with the
projector ceiling mount kit) from the bottom of the projector up and around the AutoScope
lens motor housing. For floor installations (where the projector is upright), the adapters
allow the projector to lie flat on the mounting surface.
Using eight (8) each of the supplied, Pan-Head Phillips screws, attach the AutoScope
Ceiling Mount Adapters/Projector Stands to the projector as shown in Figure 3-7.
2
24
CineWide with AutoScope
3
Ceiling Mount Adapter/
Projector Stand, Right
4 CineWide with
AutoScope Ceiling
Mount Adapter/
Projector Stand, Left
Runco VX-8d Installation/Operation Manual