Installing The Lower Triple Clamp - KTM 50 SX 2017 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.10

Installing the lower triple clamp

–
Remove protective ring
–
Remove the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.
V00273-10
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount upper steering head

bearing
–
Check whether upper steering head seal
–
Push on protective ring
601602-10
–
Position the upper triple clamp with the handlebar.
–
Mount nut
V00282-10
(50 SX)
–
Position the fork legs.
Bleeder screws
H01162-12
–
Tighten screws
Guideline
Screw, bottom triple clamp
V00274-10

.
p. 95)
.
 .

, but do not tighten it yet.

are positioned toward the front.
Info
The second milled groove in the fork leg must be flush with the upper
edge of the upper triple clamp.

.

is correctly positioned.
M8 15 Nm
(11.1 lbf ft)
38