Download
Share
Print this page
KTM 50 SX 2015 Setup Instructions
  1. Manuals
  2. Brands
  3. KTM Manuals
  4. Motorcycle
  5. 50 SX 2015
  6. Setup instructions

KTM 50 SX 2015 Setup Instructions

Hide thumbs Also See for 50 SX 2015:

Advertisement

Quick Links

Download this manual
SETUP INSTRUCTIONS
2015
50 SX
50 SX Mini
Art. no. 3213189en

Advertisement

loading

Related Manuals for KTM 50 SX 2015

Summary of Contents for KTM 50 SX 2015

  • Page 1 SETUP INSTRUCTIONS 2015 50 SX 50 SX Mini Art. no. 3213189en...
  • Page 3 KTM accepts no liability for delivery options, deviations from illustrations and descriptions, misprints, and other errors.

  • Page 4: Means Of Representation

    MEANS OF REPRESENTATION Symbols used The meaning of specific symbols is described below. Indicates an expected reaction (e.g. of a work step or a function). Indicates an unexpected reaction (e.g. of a work step or a function). Indicates a page reference (more information is provided on the specified page). Indicates information with more details or tips.
  • Page 5 Fill up with oil. ( p. 6) – Remove the motorcycle from the lift stand. ( p. 4) – Park the vehicle on the plug-in stand. 201950-10 – Print out the current PDI form found on KTM DEALER.NET and perform the delivery inspection.
  • Page 6 WORK Raising the motorcycle with a lift stand Note Danger of damage The parked vehicle may roll away or fall over. – Always place the vehicle on a firm and even surface. – Raise the motorcycle at the frame underneath the engine. Lift stand (59229055000) The tires should no longer be in contact with the ground.
  • Page 7 WORK –  Position the handlebar clamps. Fit and evenly tighten the screws Guideline Screw, handlebar clamp 20 Nm (14.8 lbf ft) Info Make sure the gap width is even. Refueling Danger Fire hazard Fuel is highly flammable. – Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no fuel is spilt, especially on hot vehicle components.
  • Page 8 WORK –  Turn the tank cap counterclockwise and pull it up. 601580-10 Closing filler cap – Put the tank cap on and turn it clockwise. Info Run the fuel tank breather hose  without kinks. 601580-11 Filling up with oil (50 SX Mini) Warning Engine failure If the vehicle is run without 2-stroke oil in the tank, the result is engine failure.
  • Page 9 WORK Closing oil tank cap (50 SX Mini) – Put the oil tank cap on and turn it clockwise. Info  Run the oil tank breather hose without kinks. 601582-11...

  • Page 10: Technical Data - Tightening Torques For Chassis

    TECHNICAL DATA - TIGHTENING TORQUES FOR CHASSIS – Spoke nipple M3.5 3 Nm (2.2 lbf ft) – Screw, brake linings 8 Nm (5.9 lbf ft) Rear brake caliper screw 10 Nm (7.4 lbf ft) Loctite ® 243™ – Remaining nuts, chassis 10 Nm (7.4 lbf ft) –...
  • Page 11 SUBSTANCES Engine oil, 2-stroke Standard/classification – JASO FD ( p. 10) Guideline – Only use high grade 2-stroke engine oil of a reputable brand. Fully synthetic Recommended supplier Motorex ® – Cross Power 2T Super unleaded (ROZ 95/RON 95/PON 91) Standard/classification –...
  • Page 12 STANDARDS JASO FD JASO FD is a classification for a 2-stroke engine oil that was specifically developed for the extreme demands of racing. Thanks to first rate synthetic esters and specially designed additives, superb combustion is achieved even under extreme operating conditions.
  • Page 13 *3213189en* 3213189en 06/2014 KTM-Sportmotorcycle AG 5230 Mattighofen/Austria Photo: Mitterbauer/KTM http://www.ktm.com...

This manual is also suitable for:

50 sx mini 2015