KTM 50 SX 2017 Owner's Manual page 62

12 BRAKE SYSTEM
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the applicable regu-
lations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5
brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
–
Press the brake piston back into the basic position and ensure that brake fluid does
not flow out of the brake fluid reservoir, sucking it away if necessary.
H01440-10
–
Remove lock washer
–
Remove screw
H01442-10
–
Remove the brake linings.
–
Clean the brake caliper.
–
Insert the new brake linings.
Info
Always change the brake linings in pairs.
Ensure that the brake linings are correctly positioned in the holding spring.
H01443-01
–
Mount and tighten screw
Guideline
Screw, brake linings
–
Mount lock washer
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking
effect.
–
H01444-10
–
–
Check the brake discs. (
( p. 67)

.
 with membrane  .

.

.

.

.
Always keep the brake discs free of oil and grease.
Clean the brake discs with brake cleaner when necessary.
p. 57)
p. 34)
M5 8 Nm (5.9 lbf ft)
60