Installing The Fuel Tank; Removing The Start Number Plate - KTM 50 SX 2017 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.15

Installing the fuel tank

Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
–
Avoid skin, eye and clothing contact with fuel.
–
Immediately consult a doctor if you swallow fuel.
–
Do not inhale fuel vapors.
–
In case of skin contact, rinse the affected area with plenty of water.
–
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
–
Change your clothing in case of fuel spills on them.
–
Keep fuels correctly in a suitable canister, and out of the reach of children.
11.16

Removing the start number plate

Main work
–
Check the throttle cable routing. (
–
Mount fuel hose
R00531-11
–
Position the fuel tank.
–
Make sure that no cables or throttle cables are trapped or damaged.
–
Mount and tighten screw
Guideline
Remaining screws, chassis
–
Position the fuel tank breather in the steering stem.
R00530-11
Finishing work
–
Mount the seat. (
–
Remove screw
–
Unhook the start number plate from the brake line and remove it.
H01425-10
p. 55)

.

.
p. 47)

.
M6 10 Nm (7.4 lbf ft)
43