16
SERVICE WORK ON THE ENGINE
(50 SX)
–
Remove gear oil monitoring screw
H00083-10
(50 SX Mini)
–
Remove gear oil monitoring screw
S00882-10
–
Remove filler plug
–
Add gear oil until it flows out of the hole in the gear oil monitoring screw.
Gear oil (ATF Dexron 3) (
–
Mount and tighten screw
Guideline
Screw, gear oil level check
–
Mount and tighten filler plug
H01460-10
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and death.
–
–
–
Start the engine and check that it is oil-tight.
. Position the motorcycle upright.
p. 93)
in the opening used to check the gear oil level.
.
Always make sure there is sufficient ventilation when running the
engine.
Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
.
.
M6
6 Nm (4.4 lbf ft)
83