Configuring Ip Address Information; Setting The Hostname; Configuring Radius Authentication; Figure 2: Ruggedrouter Setup Password Change Menu - RuggedCom RuggedRouter RX1000 User Manual

Figure 2: RuggedRouter Setup Password Change Menu

Configuring IP Address Information

The Change Port IP Address command configures port IP addresses and gateways.

Figure 3: RuggedRouter Interfaces Setup Menu

Each port number X has a default address of 192.168.X.1 and a mask of
255.255.255.0.
The Configure Default Gateway Settings command configures the default gateway.
The Configure DNS Client Settings command configures the DNS server address. If
the router is part of a domain, enter the domain name in the "Search Domain" field.

Figure 4: RuggedRouter DNS Client Menu

Setting The Hostname

The Set Hostname command sets the hostname, shown in shell prompts and Web
Management.

Configuring Radius Authentication

The Set Radius Authentication command configures the address of a Radius server,
if available.
RuggedCom
Chapter 1 – Setting Up And Administering The Router
29