Current Routes & Interface Table; Upgrading Software - RuggedCom RuggedRouter RX1000 User Manual

RuggedRouter User Guide
When at least one logical interface is configured, ADSL Link statistics will be
available. These statistics are available from links on the DDS WAN Interfaces
menu.
The Local SNR Ratio is an effective indicator of line quality. SNR values above 40
db correspond to excellent line quality while values below 10 db result in marginal
operation or failure.
Current Routes & Interface Table
The table provided by this command is as described in the Networking menu,
Network Utilities sub-menu. It is also provided here as a convenience.

Upgrading Software

For some customers, access to remote sites in accomplished solely by an ADSL
connection. Usually a software upgrade will stop the system being upgraded,
perform the upgrade and then restart it. If ADSL was upgraded in this way, the
upgrade would fail as the ADSL link was taken down. Instead, ADSL software
upgrades modify only the software on the disk. You must schedule a reboot in order
to run the new version of ADSL software.
94 RuggedCom