Restoring A Configuration; Figure 9: Selecting A Configuration To Reload; Figure 10: Selecting A Previously Made Configuration - RuggedCom RuggedRouter RX1000 User Manual

Restoring A Configuration

The Restore A Previous Configuration command provides a means to restore a
previously taken snapshot of the configuration of the router.
Note: The router will reboot immediately after restoring configuration.
The user is first prompted to select either the factory default configuration or a
previously made archive.
Note: Restoring the factory defaults will reset IP addresses and may make the
router impossible to reach from the network.

Figure 9: Selecting a configuration to reload

Initially, your RuggedRouter will have no previously saved configurations. The
factory defaults will always be available.

Figure 10: Selecting a previously made configuration

Once a configuration is selected the archive will be restored. After the configuration
is restored, the router will reboot immediately.
RuggedCom
Chapter 1 – Setting Up And Administering The Router
33