5.2 Programming New Image - Motorola HC700-G User Manual

Administering the 4 and 8 Bay Charging/Communication Cradles
user (u): The user name that the Cradle uses to access the host; that user must have permission to read
the image file.
ftp password (pw): The "user" password.
target name (tn): The name of the target system to be added to the host.
To change the current boot parameters, type <c> at the boot prompt. In response, the boot program
prompts you for each parameter. If a particular field has the correct value already, press <Enter>. To
clear a field, enter a period ( . ), then press <Enter>. To go to previous field enter a "-", then press
<Enter>. If you want to quit before completing all the parameters, type <Ctrl>+<D>.

5.2 Programming new Image

Make sure that the file name parameter is set to the System image .bin path.
To program a new system image: type <P> at the boot prompt. The new image will be downloaded to
the Cradle over FTP and will be programmed to its flash memory. To start running the new image type
d at the boot prompt or restart the Cradle by turning off and on the power supply.
Using this option P, the new boot ROM version knows according to the bin file content to distinguish
between bootrom, system image or system package (boot rom + system image) programming.
188