In the SNMP model of network management, a management station accesses a set of variables known
as a Management Information Base (MIB) which are on the managed device. This sectiont describes
cradle Enterprise MIB; an enterprise MIB is really accessing data in our system or application.
How to start a SNMP monitoring with the Cradle:
Make sure you have a MIB browser tool, one can use iReasoning freeware tool.
1.
The IP address of the Cradle to which you want to connect. (the IP address can be retrieved from
2.
looking at the printings on the Service port, female RS232 9-pins).
Load Cradle custom MIB file to MIB browser tool.
3.
4. Administering the Cradle Using SNMP
167