About This Guide; Related Documents - Dell Z9100-ON Installation Manual

About this Guide

This guide provides site preparation recommendations, step-by-step procedures for rack mounting and
desk mounting, inserting optional modules, and connecting to a power source.
CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when
handling this equipment.
WARNING: Only trained and qualified personnel can install this equipment. Read this guide
before you install and power up this equipment. This equipment contains two power cords.
Disconnect both power cords before servicing.
WARNING: This equipment contains optical transceivers, which comply with the limits of Class 1
laser radiation.
Figure 1. Class 1 Laser Product Tag
WARNING: When no cable is connected, visible and invisible laser radiation may be emitted from
the aperture of the optical transceiver ports. Avoid exposure to laser radiation and do not stare
into open apertures.

Related Documents

For more information about the Z9100–ON system, see the following documents.
• Dell Networking Getting Started Guide for the Z9100–Open Networking (ON) System
• Dell Networking Release Notes for the Z9100–Open Networking (ON) System
• Dell Open Networking Troubleshooting Guide
• Dell Networking Command Line Reference Guide for the Z9100–Open Networking (ON) System
• Dell Networking Configuration Guide for the Z9100–Open Networking (ON) System
NOTE: For the most recent documentation, visit Dell Support: http://www.dell.com/support.
About this Guide
1
5