Dell Z9100-ON Installation Manual page 9

Table 1. Z9100–ON LED Behavior
LED
System Status/Health LED
Power LED
Master LED
FAN LED
LOCATOR LED
Table 2. Management Ethernet Port LEDs
LED
Link LED
Table 3. QSFP28 Port LEDs
LED
Link LED
Activity LED
The Z9100–ON System
Description
• Solid green — Normal Operation
• Blinking green — Booting
• Solid amber — Critical system error
• Blinking amber — Non-critical system error (fan
failure or power supply failure)
• Off — No power
• Solid Green — Normal
• Solid amber — POST is in process
• Blinking amber — Power Supply failed
• Off — Switch is in Stacking Slave mode
• Solid green — System is in Stacking Master or
Standalone mode
• Solid green — fan powered and running at the
expected RPM
• Solid amber — fan failed (including
incompatible airflow direction when you insert
the PSU or fan trays with differing airflows)
• Off — Locator function is disabled
• Blinking blue — Locator function is enabled
Description
• Off — No Link
• Solid green — Link on 1 Gbps speed
• Solid yellow — Link on 10/100 Mbps speeds
Description
• Off — No Link
• Solid green — Port activity operating at
maximum port speed
• Solid amber — Port activity operating at lower
speed
• Off — No Link
• Flashing green (~30 ms) — port activity
operating at maximum port speed
• Flashing amber (~30 ms) — port activity
operating at lower port speed
9