Table of Contents
Advertisement
Safety
Transport Use a sturdy lifting carriage or stacker for transporting the ma-
Setup The power cable must have a plug authorized for the country in
Operating Instructions 878-M PREMIUM - 02.0 - 02/2018
3 Safety
This chapter contains basic information for your safety. Read the
instructions carefully before setting up or operating the machine.
Make sure to follow the information included in this section. Failure
to do so can result in serious injury and material damage.
3.1 Basic safety instructions
The machine may be used only as described in these operating
instructions.
The operating instructions should be available at the machine's
location at all times.
Work on live components and equipment is prohibited. Exceptions
are defined in the regulations set forth in DIN VDE 0105.
For the following work, the machine must be disconnected from
the power supply using the main switch or by disconnecting the
power plug:
• Replacing the needle or other sewing tools
• Leaving the workplace
• Performing maintenance work and repairs
• Threading (can be used the lock button)
Missing or faulty spare parts could impair safety and damage the
machine. Make sure you only use original replacement parts from
the manufacturer.
chine. Raise the machine max. 20 mm and secure it against
slipping off.
which the machine is being used. The power plug may only be
connected to the power cable by a qualified specialist.
13
Advertisement
Table of Contents
