Key Position Adjustment Setting - ELNA lotus 2 Instruction Manual

w
z
x
c
v
b
n
Key position adjustment setting
You can adjust the key position when you think the key
q
sensor is off from the actual key position.
Enter the setting mode.
Press the right arrow key q twice to select the key
position adjustment setting.
The key position adjustment screen appears and "oF"
(OFF) mark is shown on the screen.
Press the stitch width adjusting button " " w to activate
the key position adjustment setting.
The "oF" mark changes to "on" (ON) and "P1" is shown
on the LCD display.
• Key position calibration
z With a seam ripper, press q on the touch panel of
your machine.
x "P2" will be shown on the LCD display. Press the w
on the touch panel.
c "P3" will be shown on the LCD display. Press the e
on the touch panel.
v "P4" will be shown on the LCD display. Press the r on
the touch panel.
b "P5" will be shown on the LCD display. Press the t on
the touch panel.
n The screen will back to the setting screen with a
buzzer sound.
NOTE:
To cancel the calibration, press the stitch width
adjusting button " ". The "oF"(OFF) mark is shown on
the screen and the calibration will be canceled.
25