Using The Start/Stop Button; Controlling Sewing Speed; Speed Control Slider; Foot Control - ELNA lotus 2 Instruction Manual

q
e
Using the start/stop button
Turn off the power switch.
Insert the machine plug into the power inlet.
Insert the power supply plug into the wall outlet.
Turn on the power switch.
w
t
r
y
Controlling Sewing Speed

Speed control slider

Sewing speed can be varied by the speed control slider
according to your sewing needs.
To increase sewing speed, move the slider to the right.
To decrease sewing speed, move the slider to the left.

Foot control

Depress the foot control to start the machine.
The further down you press on the foot control, the faster
the machine runs.
The maximum sewing speed can be varied by the speed
control slider.
8
q Power switch
w Machine plug
e Power inlet
r Power supply plug
t Wall outlet
y Start/Stop button
NOTE:
The start/stop button does not work when the foot
control is connected.
NOTE:
The machine will be initialized when turning on the
power switch. Do not touch the machine while the
machine is being initialized.