Recording Knob Movements At Steps (Motion); Recording/Playing Motion; Clearing Motion Data - Roland TR-8S Reference Manual

Recording Knob Movements at Steps

Recording/Playing MOTION

While the MOTION [REC] button is lit, movements of the instrument
[TUNE] knobs, [DECAY] knobs, and
steps.
While the MOTION [ON] button is lit, recorded movements of the
instrument [TUNE], [DECAY], and
* REVERB LEVEL, DELAY LEVEL/TIME/FEEDBACK, MASTER FX CTRL, and
MASTER FX ON are also recorded and played back according to the
state of the buttons described above.
* If you move a knob while the MOTION
icon appears in the screen, and the triangle icon becomes a hollow
outline.
Another operating method
1.
While a pattern plays, hold down the MOTION
button and operate a knob.
This lets you record a motion only while you're holding down the
button.
Entering a value at a specified step
While the [TR-REC] button is lit, you can specify a step and enter a
value for a knob.
1.
Operate a knob while holding down a pad [1]–[16].
16
[CTRL] knobs are recorded in the
[CTRL]
knobs are played back.
[REC] button is lit, an "M"
[REC]

Clearing Motion Data

1.
Hold down the [SHIFT]
MOTION [ON] button.
2.
Turn the [VALUE] knob to select the variation from
which you want to clear motion data.
You can also use the [A]–[H]
If you want to clear motion data from all variations, choose
3.
Press the [ENTER] button.
Motion data is cleared from the selected variation.
You can also use the following methods to clear motion data.
Clearing motion data from the variation selected for playback
This clears all motion data from the variation that's selected for
playback.
1.
Hold down the MOTION
[CLEAR]
button.
Clearing motion data from a specific track
This clears all motion data from the track that's specified by the
variation selected for playback.
1.
Hold down the MOTION
instrument select button.
Clearing motion data for only a specific knob
This clears all motion data of a knob recorded in the track that's
specified by the variation selected for playback.
1.
Hold down the MOTION
knob.
MEMO
You can also clear motion data by holding down the
button and making the steps go dark.
Clearing motion data for a specific variation
This clears the motion data of the specified variation.
1.
Hold down the MOTION
button [A]–[H].
(Motion)
button and press the
buttons to select the variation.
[ON] button and press the
[ON]
button and press the
[ON]
button and operate a
[CLEAR]
[ON] button and press a
"ALL."