Table of Contents
Advertisement
Parameter
Value
NOISE
Color
0–255
MASTER FX
[CTRL]
*1
Level
-INF, -53.0dB–
MASTER FX
0.0dB–+10.0dB
[CTRL]
*1
Direction
UP, DOWN
*1 This can be controlled by specifying the Ctrl parameter.
KIT: EXT IN
Parameter
Value
BD, SD, LT, MT,
HT, RS, HC, CH,
SideChnSrc
OH, CC, RC, TRG
(TRIGGER OUT)
SideChnType
1–8
SideChnDpt
0–255
-40.0dB–0.0dB–
+40.0dB
Gain
(0.5 dB
increments)
L127–CENTER–
Pan
R127
ReverbSend
0–255
DelaySend
0–255
KIT: LFO
Parameter
Value
SIN, TRI, SAW,
Waveform
SQR, S&H
Tempo Sync
OFF, ON
(TempoSync =
OFF) 0–255
(TempoSync =
Rate
ON) 64.00–0.25
step
(steps of 0.25)
Explanation
Moves a filter that is applied to noise.
If Color is set to 0, no noise is output.
This parameter is intended to be
[CTRL]
controlled by the MASTER FX
knob.
Specifies the noise level.
Switches the direction in which the
filter is moved by Color.
Explanation
Selects the instrument that is used as
the trigger for the side chain effect.
Selects the type of side chain effect.
1:
Ducking,
1step
Type =
Width =
2:
Ducking,
2step,
Type =
Width =
(Fast Rise)
3:
Ducking,
1step,
Type =
Width =
(Slow Rise)
4:
Gate,
1step
Type =
Width =
5:
Ducking,
Narrow
Type =
Width =
6:
Ducking,
2step,
Type =
Width =
(Slow Rise)
7:
Gate,
Half step
Type =
Width =
8:
Ducking,
1step,
Type =
Width =
(Unique Rise)
Adjusts the depth of the side chain
effect.
Specifies the gain.
Specifies the pan.
Adjusts the level sent to reverb.
Adjusts the level sent to delay.
Explanation
Selects the LFO waveform.
Choose ON if you want the LFO to
synchronize with the tempo.
Specifies the LFO rate.
KIT: OUTPUT
Parameter
Value
BD
MIX,
SD
ASSIGN 1,
LT
ASSIGN 2,
MT
HT
ASSIGN 3,
RS
ASSIGN 4,
HC
ASSIGN 5,
CH
ASSIGN 6,
OH
ASSIGN A,
CC
ASSIGN B,
RC
EXT IN
ASSIGN C
*2
KIT: MUTE
Parameter
Value
BD
SD
LT
MT
HT
OFF, BD, SD, LT,
RS
MT, HT, RS, HC,
HC
CH, OH, CC, RC
CH
OH
CC
RC
*2
Editing a Kit's Settings (KIT Edit)
Explanation
Selects the output destination of each
instrument.
MIX:
Output from the MIX OUT jacks.
ASSIGN 1–6:
Output as monaural
from an ASSIGNABLE OUT/TRIGGER
OUT jack.
(When [UTILITY] ASSIGN OUT 1–6 = NORMAL, BOOST)
The sound of the instrument is
output, and is not output from the
MIX OUT jacks.
(When [UTILITY] ASSIGN OUT 1–6 = NORMAL, BOOST)
The sound of the instrument is
output, and is not output from the
MIX OUT jacks.
ASSIGN A–C:
Output as stereo from
an ASSIGNABLE OUT/TRIGGER OUT
jack.
(When [UTILITY] ASSIGN OUT 1–6 = NORMAL, BOOST)
The sound of the instrument is
output, and is not output from the
MIX OUT jacks.
(When [UTILITY] ASSIGN OUT 1–6 = TRIGGER)
trigger signal is output, and the
sound of the instrument is also
output from the MIX OUT jacks.
Explanation
For the OpenHH sound and sample
tones, you can specify that their sound
be muted when another instrument is
sounded.
* By selecting the instrument that plays
CloseHH, you can use CloseHH to
close (mute) the sustained sound of
OpenHH.
The
27
Advertisement
Table of Contents
