Importing Or Exporting A Pattern Or Kit; Exporting A Pattern Or Kit; Exporting A Pattern; Exporting A Kit - Roland TR-8S Reference Manual

Importing or Exporting a Pattern or Kit

Exporting a Pattern or Kit

Here's how you can export a kit or pattern to an SD card.

Exporting a Pattern

Insert the SD card into the TR-8S.
1.
Press the [UTILITY] button to make it light.
The Utility screen appears.
2.
Use the [VALUE] knob to select
and then press the [ENTER]
3.
[VALUE]
Use the knob to select
press the [ENTER] button.
4.
Use the [VALUE] knob to select the pattern that you
want to export, and then press the
You may select multiple patterns.
A check mark appears at the left of the pattern number(s) that will
be exported.
5.
Hold down the [SHIFT]
[ENTER] button, and input a name for the file that
will be exported.
Controller Explanation
[VALUE] knob Change the character.
[UTILITY] button Moves to the right.
[COPY] button Moves to the left.
[SHIFT] button
Deletes one character (Erase).
+[COPY] button
[SHIFT] button
Inserts one character (Insert).
+[UTILITY] button
[SHIFT] button Switches between uppercase/lowercase/
+[VALUE] knob numerals.
6.
[ENTER]
Press the button.
A confirmation message appears.
7.
To execute, use the [VALUE]
and press the OK.
If you decide to cancel, use the
[ENTER]
and then press the
When export is completed, the display indicates
and you exit the UTILITY screen.
34
"UTILITY:Export,"
button.
"Pattern,"
and then
[ENTER] button.
button and press the
knob to select "OK,"
[VALUE] knob to select "Cancel,"
button.
"Completed!,"

Exporting a Kit

Insert the SDcard into the TR-8S.
1.
Press the [UTILITY] button to make it light.
The Utility screen appears.
2.
[VALUE]
Use the knob to select
and then press the [ENTER]
3.
Use the [VALUE] knob to select
[ENTER]
press the button.
4.
Use the [VALUE] knob to select the kit that you
want to export, and then press the
You may select multiple kits.
A check mark appears at the left of the kit number(s) that will be
exported.
5.
[SHIFT]
Hold down the
[ENTER] button, and input a name for the file that
will be exported.
Controller Explanation
[VALUE] knob Change the character.
[UTILITY] button Moves to the right.
[COPY] button Moves to the left.
[SHIFT] button
Deletes one character (Erase).
+[COPY] button
[SHIFT] button
Inserts one character (Insert).
+[UTILITY] button
[SHIFT] button
Switches between uppercase/lowercase/
+[VALUE] knob numerals.
6.
Press the [ENTER] button.
A confirmation message appears.
7.
[VALUE]
To execute, use the
and press the OK.
If you decide to cancel, use the
and then press the [ENTER]
When export is completed, the display indicates
and you exit the UTILITY screen.
"UTILITY:Export,"
button.
"Kit," and then
[ENTER] button.
button and press the
"OK,"
knob to select
[VALUE] "Cancel,"
knob to select
button.
"Completed!,"