Error Messages - Roland TR-8S Reference Manual

Error Messages

Message Meaning
The SD card is not
inserted, or is inserted
incompletely.
SDCard The SD card was removed
NotReady!
after you selected data
that was on the SD card.
The format of the SD card
is invalid.
Data could not be read
from the SD card.
Read Error!
The file is damaged.
Data could not be written
to the SD card.
Write Error!
The format of the SD card
is invalid.
There is insufficient space
SD Card Full!
on the SD card.
The contents of the
Sys Mem
TR-8S's save area may be
Damaged!
damaged.
An unusually large
MIDI Buff amount of MIDI data was
Full! received, and could not
be processed.
The MIDI IN connection
MIDI Offline!
was broken.
The TR-8S was unable
to start up. The program
Program could not be read
Error! correctly. Alternatively,
the system update
program may be invalid.
Since the TR-8S is playing,
Now Playing! this operation cannot be
executed.
Since the TR-8S is
Now
recording, this operation
Recording!
cannot be executed.
The file was not found on
Not Found!
the SD card.
Not The format of the audio
Supported!
file is not supported.
The audio file exceeds
Too Long
the supported number of
Size!
samples.
There is no free space in
No Space!
the user sample area.
There is no enough free
No Tone! space to save the user
sample tone settings.
Action
Turn off the unit, firmly
insert the SD card, and
then turn on the unit
once again.
Use the TR-8S to format
the SD card (p. 7).
Make sure that the SD
card is correctly inserted.
Do not use this file.
Make sure that the SD
card is correctly inserted.
Use the TR-8S to format
the SD card (p. 7).
Delete unneeded data.
Execute the factory reset
operation (p. 44).
If this does not solve
the problem, contact
your dealer or customer
support.
Reduce the amount of
MIDI messages that are
being transmitted.
Check that there is no
problem with the MIDI
cable connected to the
TR-8S's MIDI IN, and that
the MIDI cable was not
disconnected.
Use the correct program
to perform the update
once again. If this does
not solve the problem,
contact your dealer or
customer support.
Stop playback before you
execute the operation.
Stop recording before
you execute the
operation.
Make sure that the file
exists on the SD card.
In order to load the file,
you'll need to convert it
to a supported format.
In order to load the audio
file, you'll need to shorten
it (decrease the number
of samples) or lower its
sampling frequency.
Delete unneeded user
samples to increase the
amount of free space.
Delete unneeded user
samples to increase the
amount of free space.
49