Standard Equipment; Safety Information - Fluke 2700G Calibration Manual

2700G
Calibration Manual

Standard Equipment

The Product ships with:
•
•
•
•
•
•
•
•
•

Safety Information

A Warning identifies conditions and procedures that are dangerous to the user.
A Caution identifies conditions and procedures that can cause damage to the
Product or the equipment under test.
To prevent injury, only assemble and operate high-pressure
systems if you know the correct safety procedures. High-
pressure liquids and gases are hazardous and the energy from
them can be released without warning.
To prevent possible electrical shock, fire, or personal injury:
•
•
•
•
•
•
•
2
Protective cover (installed)
Three AA alkaline batteries (installed)
2700G Safety Information (printed)
Report of calibration
Manuals CD-ROM with translated users manuals
USB cable
USB power adapter
NPT to ¼ BSP male adapter
NPT to M20 x 1.5 male adapter
Read all safety Information before you use the Product.
Use the Product only as specified, or the protection
supplied by the Product can be compromised.
Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
Do not use and disable the Product if it is damaged.
Remove the batteries if the Product is not used for an
extended period of time, or if stored in temperatures above
50 °C. If the batteries are not removed, battery leakage can
damage the Product.
Replace the batteries when the low battery indicator shows
to prevent incorrect measurements.
The battery door must be closed and locked before you
operate the Product.
Warning