Resetting Interface Module (Profinet Io) To Factory Settings - Siemens SIMATIC S7-1500 System Manual

Maintenance
13.5 Reset to factory settings
Reference
Additional information on "Reset to factory settings" can be found in the Function Manual
Structure and use of the CPU memory
(http://support.automation.siemens.com/WW/view/en/59193101) in the section on memory
areas and retentivity, and in the online help for STEP 7. For information on the memory reset
of the CPU, refer to the chapter CPU memory reset (Page 158).
13.5.2

Resetting interface module (PROFINET IO) to factory settings

Function
"The interface module can be reset to its factory state using "Reset to factory settings".
Method of resetting an interface module to factory settings
● Via STEP 7 (online via PROFINET IO)
Procedure using STEP 7
To reset an interface module to factory settings via STEP 7, follow these steps:
Make sure that an online connection to the interface module exists.
1. Open the online and diagnostics view of the interface module.
2. In the "Functions" folder, select the "Reset to factory settings" group.
3. Click the "Reset" button.
4. Click "OK" in response to the confirmation prompts.
Result: The interface module then performs a "Reset to factory settings".
196
Automation system
System Manual, 12/2014, A5E03461182-AC