16 ELECTRICAL SYSTEM
16.9
278
Checking the headlight setting
400726-10
Tip
Insert a spare fuse so that it is available if needed.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover.
Finishing work
–
Mount the seat. (
p. 187)
–
Park the vehicle on a horizontal surface in front of a light-
colored wall and make a mark at the height of the center of
the low beam headlight.
–
Make another mark at a distance
Guideline
B
Distance
–
Position the vehicle perpendicular to the wall at a distance
from the wall and switch on the low beam.
Guideline
A
Distance
–
The rider, with luggage and passenger if applicable, now
mounts the motorcycle.
–
Check the headlight setting.
B
under the first marking.
5 cm (2 in)
A
5 m (16 ft)