Table of Contents
Advertisement
–
Check the chain sliding guard for wear at the recess.
Info
When the chain sliding guard is new, the rivets
half visible at the bottom edge
»
When the rivets of the chain are no longer visible at the
bottom edge of the recess of the chain sliding guard:
–
Change the chain sliding guard.
S02268-10
–
Check that the chain sliding guard is firmly seated.
»
If the chain sliding guard is loose:
–
Tighten the screws on the chain sliding guard.
Guideline
Screw, chain slid-
ing guard
–
Check the chain guide for wear.
»
If the chain guide is worn:
–
Change the chain guide.
–
Check that the chain guide is firmly seated.
»
If the chain guide is loose:
–
Tighten the screws on the chain guide.
401670-01
SERVICE WORK ON THE CHASSIS 13
C
M5
1
are
of the recess.
5 Nm (3.7 lbf ft)
195
Advertisement
Table of Contents
