–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Clean and grease shaft seal ring
the spacer.
Long-life grease (
–
Insert the spacer.
–
Clean and grease the thread of the wheel spindle and nut.
M00614-10
Long-life grease (
–
Mount the rubber dampers and rear sprocket carrier on the
rear wheel.
–
Place the rear wheel in the swingarm and bring the brake disc
into contact with the brake caliper.
–
Mount wheel spindle
–
Push the rear wheel forward as far as possible and lay the
chain on the rear sprocket.
M00615-10
WHEELS, TIRES 15
1
and contact surface
p. 342)
p. 342)
2
but do not push it in all the way.
A
of
249