Table of Contents
Advertisement
15.5
Checking the rear hub rubber dampers
Info
The engine power is transmitted from the rear sprocket to the rear wheel via 6 rubber dampers. The rubber
dampers wear out during operation. If the rubber dampers are not changed in time, the rear sprocket car-
rier and the rear hub will be damaged.
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Remaining chassis
screws
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
S00289-10
Preparatory work
–
Raise the vehicle with the center stand. (
–
Remove the rear wheel.
WHEELS, TIRES 15
6
in the drill hole.
7
.
M6
10 Nm (7.4 lbf ft)
p. 185)
(
p. 245)
251
Advertisement
Table of Contents
