Zone Sensor Options - Trane UniTrane Installation, Operation And Maintenance Manual

Zone Sensor Options

Control sensor options include both unit-mounted
(factory-installed) and wall-mounted sensors. Tracer
controller options available for the zone sensors are:
• Tracer® ZN010 is a stand-alone microprocessor
controller that controls fan coils and cabinet heaters.
• Tracer® ZN510 is a discrete speed controller that can
be used in a stand-alone application or can
communicate with a building automation system
®
using LonTalk Communication
• Tracer® ZN520 is a discrete speed controller that can
be used in a stand-alone application or can
Figure 69. Unit-mounted temperature
sensor (SP , OALMH)
ZN510, ZN520, UC400-B Controller
Options
Figure 72. Unit-mounted temperature
sensor (SP , OALMH, OCC/
UNOCC)
UNT-SVX07J-EN
®
•
Zone sensors have an internal thermistor and operate on
24 Vac. Options with setpoint knobs are available in
Fahrenheit or Celsius. See
available options and model number references.
ZN010 Controller Options
Figure 70. Wall-mounted temperature
sensor (SP , OALMH)
Figure 73. Wall-mounted display
temperature sensor (SP ,
OCC/UNOCC, OALMH,
COMM)
communicate with a building automation system
using LonTalk Communication
Tracer® UC400-B delivers single zone VAV control in a
stand-alone operation or as part of a building
automation system using BACnet
Figure 69
Figure 71. Split-mounted zone
Figure 74. Wall-mounted temperature
®
communications
through Figure 79 for
sensor, unit-mounted fan
speed control, and wall-
mounted setpoint dial
(OCC/UNOCC, COMM)
91