Siemens CP-8000 User Manual page 446

Engineering via SICAM WEB
If the variable name is valid, the type and the actual value of the variable is displayed:
You can now enter a value into the field N
right beside the button
Example: Binary value
If you select a signal input with data type BOOL, the value range T, F is displayed.
When you enter a valid value, for instance T, the button
·
Click on the button
The new value is written on the signal in the IL and is displayed right beside the variable type.
The test mode is automatically switched on and the button
You also can regard simultaneously the status of up to 10 variables from the IL.
If you click on the button
446
Unrestricted
. The permitted value range is displayed
EW VALUE
.
, the test mode is terminated.
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
is enabled.
is enabled.
DC8-037-2.02, Edition 10.2017