Parameter Entry - Siemens CP-8000 User Manual

Sicam a8000 series

Hide thumbs Also See for CP-8000:

Table of Contents

Preparing the Engineering

Parameter Entry

In the submenu Settings you find all configuration data of the device.

You have the possibility to change configuration parameters. In the left window area, all con-

figuration data is shown as a hierarchical directory tree:

CP-8000/CP-802x

─ Master Module

At present, a modification of periphery parameters (node I/O Master Module) is not possible.

At present, navigation is possible via mouse only (via finger in case of touch screen).

In order to carry out modifications, you have to log in as administrator.

This is how to retrieve information about parameters:

In the directory tree, select any node

You can expand or collapse each directory by clicking

To the right of the directory tree, all parameters of the selected parameter group or table pa-

rameters (such as topology information, dataflow messages and so on) are shown in a table.

Select the parameter group or parameter you want

In the table, click on a value of a parameter

For showing/hiding the description of the selected parameter, click on the yellow bar locat-

ed to the right of the work area

Unrestricted

SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual

DC8-037-2.02, Edition 10.2017

Show Quick Links

Table of Contents

Cp-8021 Cp-8022