Siemens CP-8000 User Manual page 361

Category
Parameter of measured
values ACP1703
Process data command
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
Parameter
Kind_of_parameter
Interrogation-group
MV_CASDU1
MV_CASDU2
MV_IOA1
MV_IOA2
MV_IOA3
MV_TI
Event_(C)
Text_(C)
State_TextOn_(C)
State_TextOff_(C)
State_TextFlt_(C)
State_TextInt_(C)
SID-BSE
SID-ST
SID-SSE
Engineering via SICAM WEB
Meaning
· According NUC
· Threshold value
· Smoothing factor
· Lower limit for transmission of measured
values
· Upper limit for transmission of measured
values
· Activation parameters for measured values
General interrogation (group 1...16; none)
Address of the datapoint. The complete
address consists of CASDU1, CASDU2,
IOA1, IOA2 and IOA3. CASDU1 and
CASDU2 = 255 means no spontaneous
transmission.
Address of the datapoint. The complete
address consists of CASDU1, CASDU2,
IOA1, IOA2 and IOA3. CASDU1 and
CASDU2 = 255 means no spontaneous
transmission.
Address of the datapoint. The complete
address consists of CASDU1, CASDU2,
IOA1, IOA2 and IOA3. CASDU1 and
CASDU2 = 255 means no spontaneous
transmission.
Address of the datapoint. The complete
address consists of CASDU1, CASDU2,
IOA1, IOA2 and IOA3. CASDU1 and
CASDU2 = 255 means no spontaneous
transmission.
Address of the datapoint. The complete
address consists of CASDU1, CASDU2,
IOA1, IOA2 and IOA3. CASDU1 and
CASDU2 = 255 means no spontaneous
transmission.
Type identification according to
IEC 60870-5-101/104
The data point is displayed in the event list
The data point is displayed with this name
(max. 13 characters)
The state ON for single or double point infor-
mation is displayed with this name (max.
6 characters)
The state OFF for single or double point
information is displayed with this name (max.
6 characters)
The state faulty position for double point
information is displayed with this name (max.
6 characters)
The state intermediate position for double
point information is displayed with this name
(max. 6 characters)
Source identification basic system element
Source identification station number if mul-
tipoint traffic mode 0...99 if R-SID 0...254; if
automatic, the SID will be learned
Source identification supplementary system
element
Unrestricted
361