Siemens CP-8000 User Manual page 486

Service
In the submenu All Events all process events
and diagnosis events are displayed in chrono-
logical order (most recent entry first).
In the header you can see which entry you have
selected and the amount of all entries.
After opening the list, the most recent entry is
automatically selected.
You can navigate through the entire list via function keys ▼ and ▲.
In the selected entry you can see detailed information on the selected entry (date,
timestamp, etc.).
Using the function key TOP, you go to the beginning of the list (and select the first entry).
The oscillating function key TOP shows that a new event is active.
·
Press the oscillating function key TOP to refresh the entire list
The function key TOP will not be oscillating if you did select the first entry and a new event
occurs. In this case, however, the list will be refreshed.
Submenu
3.1
Events
486
Unrestricted
Submenu Display/settings
3.1.1 Event name
All Events
Status
Quality bit
Date
Time stamp
Time quality bit
Indication of daylight-saving
time
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
Meaning/range
· Freely parameterizable text
(applies for process events)
· Always beginning with "Dia"
(applies for diagnosis
events)
· Freely parameterizable text
(applies for process events)
· Coming, going (applies for
diagnosis events)
Applies for process events
(TI 30 and TI 31) only:
?: not topical
!: invalid
#: blocked
$: substituted
Date of the selected event
Timestamp of the selected
event
!: invalid (optional)
S: daylight-saving time (op-
tional)
DC8-037-2.02, Edition 10.2017