KTM 85 SX 2004 Repair Manual page 24

3-3
2
3
7
1
3
5
4
6
– Remove the bolt of the rear exhaust bracket
– Pull exhaust pipe out of the rubber sleeve
pipe.
– Loosen the two hose clamps
– Let the fuel of the float chamber run out into an appropriate basin.
– Put the carburetor into a clean cloth and lay it on the air filter box.
– Remove the radiator cap.
– Remove drain bolt 4 at the water pump cover and drain cooling
liquid.
5
– Loosen hose clamp and disconnect the radiator hose.
– Unscrew the three bolts on the clutch slave cylinders and the bolt
on the chainguard.
– Remove the chainguard and tilt the clutch slave cylinder
side.
1 .
2
, take of the exhaust
3 and remove the carburetor.
6
7
to the