Setting The Driver - Roland Edirol UA-25 Owner's Manual

Driver installation and settings (Macintosh)

Setting the driver

If you are using FreeMIDI, proceed to "FreeMIDI settings"
(p. 41).
OMS settings
1
Set the UA-25 ADVANCE (mode select) switch to the ON
position.
2
Use the USB cable to connect the UA-25 to your
computer.
fig.oms-setting
3
From the CD-ROM, drag the Driver E
(Mac OS 9) - OMS Setting folder into
the Opcode - OMS Applications
folder on the hard disk of your
Macintosh to copy it there.
fig.oms-setup
4
In the Opcode - OMS Applications
folder where you installed OMS,
double-click OMS Setup to start it
up.
fig.apple-talk
5
If a dialog box like the
one shown here
appears, click [Turn It
Off]. A confirmation
dialog box will then
appear, so click [OK].
fig.setup.eps
6
The Create a New
Studio Setup dialog
box will appear. Click
[Cancel].
If you accidentally
clicked [OK], click
[Cancel] in the next
screen.
38
If you are using the UA-25 in
conjunction with other MIDI
devices, make settings as
described in Readme_E.htm
located in the Driver E (Mac
OS 9) folder of the CD-ROM.
This unit is equipped with a
protection circuit. A brief
interval (a few seconds) after
connecting the USB cable is
required before the unit will
operate normally.
We recommend that you turn
off AppleTalk, by selecting
Chooser from the Apple menu.