Roland Edirol UA-25 Owner's Manual page 21

8
Click the Windows Start button. From the menu that
appears, select "Run..."
The "Run..." dialog box will appear.
9
In the dialog box that appears, input the following into the
"Open" field, and click [OK].
fig.05-5_30
(drive name) : \Driver\XP_2k\SETUPINF.EXE
* In the explanatory example shown here, the drive name is
given as "D:". The drive name "D:" may be different for your
system. Specify the drive name of your CD-ROM drive.
The SetupInf dialog box will appear.
You are now ready to install the driver.
10
Set the UA-25's ADVANCE (mode select) switch to the
ON position.
11
Use the USB cable to connect the UA-25 to your
computer.
If the "File signature verification" (Step 4) setting was not set to "Ignore", a
"Digital Signature Not Found" dialog box will appear.
If "File signature verification" is set to "Warn"
1.
Click [Yes].
2.
Continue the installation.
If "File signature verification" is set to "Block"
1.
Click [OK].
2.
When the "Found New Hardware Wizard" appears,
click [Finish].
3.
Return to step 1 (p. 20) and re-install the driver from the beginning of the
procedure.
Driver installation and settings (Windows)
To check the drive name
In the Windows desktop,
double-click the My Computer
icon. In the window that
appears, check the drive name
of the CD-ROM drive into
which you inserted the CD-
ROM in step7.
The drive name is the (D:) or
(E:) displayed by the CD-ROM
drive .
This unit is equipped with a
protection circuit. A brief
interval (a few seconds) after
connecting the USB cable is
required before the unit will
operate normally.
21