Roland UM-1EX Driver Installation Manual

Windows Vista users

Read this first

* This does not work with the 64-bit Edition of Windows Vista(TM).
Installation
Start up Windows with all USB cables disconnected (except for
keyboard and mouse).
Exit all applications before you begin the installation.
1.
Insert the included CD-ROM into your computer.
2.
Start up the installer for the Windows driver.
3.
1. Choose [start] – [My Computer].
2. Double-click the "DRIVER"–"Vista" folder.
3. Double-click the Setup icon.
* If a message informs you that "Driver installation must be
performed by an administrator," you must log on to
Windows as a user whose account type is Administrator,
and then perform the installation.
4. A confirmation screen regarding User Account Control will
appear, click [Continue].
5. The message "EDIROL UM-1 Driver will be installed on your
computer. —" will appear. Click [Next].
* If any other message appears, follow the directions of the
message.
6. Click [Next] to begin installation.
7. If a dialog box regarding Windows Security appears, click
[Install].
8. The screen will indicate "The UM-1 driver has been
installed."
* If any other message is displayed, proceed according to
the contents of that message.
* 4 0 7 8 1 8
UM-1EX Driver Installation
1 2 - 0 1 *
Set the UM-1EX's ADVANCED DRIVER (mode select) switch
9.
to the "ON" position.
10. Use a USB cable to connect the UM-1EX to your computer.
11. The lower right corner of the screen will indicates
"Installing device driver software," and the driver will be
installed automatically.
* If any other message is displayed, note the contents and
close the message.
12. When the lower right corner of the screen indicates "Device
driver software installed successfully," installation is
complete.
Click [Close] to close the "Driver Setup" dialog box.
13. If the "System Settings Change" dialog box appears, click
[Yes] to restart Windows.
Refer to "Before you begin," and make the necessary settings
for using the UM-1EX. You won't be able to use the UM-1EX
unless you make these settings.
* If you are unable to use the UM-1EX after connecting it, it's
possible that a problem has occurred. Refer to
"Troubleshooting" (Owner's Manual).
Copyright © 2007 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in
any form without the written permission of ROLAND CORPORATION
40781812 1MP