Mac Os X Users - Roland Edirol UA-25 Owner's Manual

Mac OS X users

Installing the driver
1
Disconnect all USB cables other than those for your
keyboard and mouse, and restart your Macintosh.
2
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your
computer.
3
In the Driver (Mac OS X) folder of the CD-ROM, double-
click UA25USBDriver.pkg.
4
The display will indicate "Welcome to the EDIROL UA-
25 USB Driver Installer". Click [Continue].
5
The display will indicate "Select a Destination".
Click the drive in which the operating system is installed to
select it, and then click [Continue].
6
The display will indicate "Easy Install".
Click Install or Upgrade.
7
The display will indicate "Installing this software
requires you to restart your computer when the
installation is done".
Click [Continue Installation].
8
The display will indicate "The software was
successfully installed".
Click [Restart] to restart your computer.
This completes installation of the UA-25 driver.
Next, make MIDI device and audio device settings.
Driver installation and settings (Macintosh)
If the "Authenticate" dialog
box appears during the
installation, input the
password and click "OK."
Select your startup disk as the
drive.
33