Roland Edirol UA-25 Owner's Manual page 17

If the "What action do you want Windows to take?" (Step 4) setting was
not set to "Ignore", a "Hardware Installation" dialog box will appear.
A dialog box with a "!" symbol will appear.
1.
Click [Continue Anyway].
2.
Continue the installation.
A dialog box with a "x" symbol will appear.
1.
Click [OK].
2.
When the "Found New Hardware Wizard" appears, click [Finish].
3.
Return to step 1 (p. 15) and re-install the driver from the beginning of the
procedure.
15
The Insert Disk dialog box will appear.
Click [OK].
16
The Files Needed dialog box will appear.
Input the following into the "Copy files from" field, and
click [OK].
(drive name):\DRIVER\USB_XP2K
* Specify the drive name of your CD-ROM drive.
If the "What action do you want Windows to take?" (Step 4) setting was
not set to "Ignore", a "Hardware Installation" dialog box will appear.
A dialog box with a "!" symbol will appear.
1.
Click [Continue Anyway].
2.
Continue the installation.
17
The screen will indicate "Completing the Found New
Hardware Wizard".
Click [Finish].
18
When driver installation has been completed, the System
Settings Change dialog box will appear.
Click [Yes]. Windows will restart automatically.
If the System Setting Change dialog box does not appear,
restart Windows from the start menu.
Driver installation and settings (Windows)
The Insert Disk dialog may
not appear. In that case,
proceed to the next step.
17