JVC LT-32DY8ZJ Instructions Manual page 32

Whenever you press the BLUE button, A.P.S.
function stops and Program Table appears
on the screen.
If you wait until the end of A.P.S., Program Table
is displayed with the programmes found and
located.
Program
By pressing /
Press / button to select the program num-
ber. You can also enter a number via digit but-
tons on the remote control. There are 100 pro-
gram storage between 0 and 99.
Band
Band can be selected either "C" or "S" by press
/ button.
Channel
Channel can be changed by
digit buttons.
Colour System
By pressing /
tem. Press / button to change the colour
system to PAL, SECAM, PAL60 or AUTO.
If Sound System is set to I, SECAM is not
available for the Colour System.
Note: In EXT mode, you can choose NTSC
3.58 and NTSC 4.43 as well.
Sound System
By pressing / button, select Sound Sys-
tem. Press / button to change the sound
system to BG, I, L, L', DK.
Search
By pressing / button, select Search. Press
/ button to start program searching.You
can also enter the desired frequency via digit
buttons when search item is highlighted.
Decoder (EXT-2)
Select Decoder by pressing
can activate or deactivate Decoder setting by
using / button.
button, select Program.
/ button or
button, select Colour Sys-
/ button. You
VCR (Video Cassette Recorder)
If you want to watch a VCR source, then it will
be better to set VCR mode On. For this, while
the cursor is on this item press the
tons to set it On.
If you want to watch a DVD , then you must set
this item "Off".
Store
By pressing
/ or OK button to store the adjustments.
"Stored..." will be displayed on the screen.
Then, TV-LINK menu will be displayed on the
screen.
Install menu in AV modes
The following screen appears in the install
menu:
INSTALL
Colour System
VCR
Store
Colour System
By pressing
pressing /
colour system to PAL, SECAM, PAL 60, NTSC
4,43, NTSC 3,58 or AUTO.
ou
VCR
By pressing
/ button, you can set the VCR to ON or OFF. .
ou
Store
By pressing
/ or OK button to store the adjustments.
"Stored..." will be displayed on the screen.
- 31 -
/ button, select Store. Press
/ select Colour System. By
button, you can change the
/ select VCR. By pressing
/ button, select Store. Press
 
/ but-