Install Menu - JVC LT-32DY8ZJ Instructions Manual

Child Lock
By pressing / select Child Lock.
 
Press / button to set the Child Lock on or
off. When on is selected, the TV can only be
controlled by the remote control handset. In
this case the control panel buttons on the TV
will not work (except the power switch). Hence,
if one of these buttons is pressed, "Child Lock
On" will be displayed on the screen when the
Menu screen is not visible.
Note:
·To turn the TV on from the standby mode , you
can press /
Language
By pressing /
 
Use / button to select the language.
EXT2 Out
By pressing / select EXT2 Out.Use
button, to set Ext-2 Out to TV/DTV, EXT-1, EXT-
4, EXT-5 Audio, EXT-6 Audio, or Monitor.
LT-32DY8ZJ TV/DTV:
·You can output the last channel you watched.
·When you watch pictures from external equip-
ments,
the channel which was previously watched will
be output.
EXT-1:
·Video and Audio signal from EXT-1 will be
output.
EXT-4:
·Video and Audio signal from EXT-4 will be
output.
EXT-5 Audio/EXT-6 Audio:
·Audio signal from EXT-5 or EXT-6 will be out-
put.
·Video signal from EXT-5 or EXT-6 cannot be
output.
·When TV Source is set to EXT-5 or EXT-6,
EXT-5 and
EXT-6 Audio setting will be available among
EXT-2 Out options.
Monitor:
buttons on the TV once.
button, select Language.
·the Video and Audio signal from TV, DTV, EXT-
1, EXT-4 which
you watch currently will be output .
· When you watch External Equipments from
EXT-3,EXT-5 or EXT-6,
only Audio signal will be output.
Note:
• When TV Source is set to EXT-5 or EXT-6,
EXT-5 and EXT-6 Audio setting will be avail-
able among EXT-2 Out options.
Auto Aspect
Auto Aspect is a feature that provides the zoom
mode of the TV set to be switched to the se-
lected default zoom mode in case no WSS or
4:3 signal by end-user.
By pressing
You can set Auto Aspect to Panoramic, Regu-
lar or 14:9 Zoom by pressing
 
/
Blue Background
You can set the TV to automatically change to
a blue screen if the signal is weak or absent,
or when there is no input from an external de-
vice.
The Blue Background feature can be turned
on or off by pressing

Install menu

By pressing
Install menu appears on the screen.
INSTALL
Program Table
Program
Band
Channel
Colour System
- 29 -
/ button, select Auto Aspect.
/ button.
 
/ button, select the fifth icon.
/ button.