Edit Pr List - JVC LT-32DY8ZJ Instructions Manual

When you are making this setting for the
first time, input 0000.
When a PIN code has already been set, en-
ter the correct PIN code.
The PIN code setting window appears.
3. Press the number buttons to input a new
PIN code (password).
4. Input the new PIN code (password) again
in the Confirm box.
"Pin code changed" appears.
Your newly chosen PIN code is now set.
You will now need to use the PIN code (pass-
word) you choose. Here to lock or to unlock
the Edit PR List's "Lock".

Edit PR List

Choose Edit PR List and press the OK button.
EDIT PR LIST appears.
The Edit PR List can be used to do the follow-
ing:
• delete registered channels
• edit channel names.
• lock channels so that they can not be watched
by children.
• set Favourites so that you can easily choose
from only the channels you often watch.
• Sometimes you may notice a drop in picture
quality while watching your programme in
the quarter-screen. This is not a fault.
• When the BACK button is pressed, the previ-
ous screen is returned to. When the TV/DTV
or MENU button is pressed, the menu dis-
appears.
• When the
the help screen appears. When it is pressed
again, the previous screen is returned to.
Here, you can preview any channel stored by
the receiver before viewing it full screen. The
complete list of channels is displayed in pages
of 17 channels at a time, with their channel
list number and a favourite channel icon if ap-
propriate.
Choosing a channel
The chosen channel is shown on the quarter-
screen.
1. Press the " " / " " buttons and choose
Select on the bar at the bottom of the screen.
2. Press the "
channel, and then press the OK button.
The picture of the chosen channel is shown
on the quarter-screen.
Deleting a channel
1. Press the " " / " " buttons and choose
Delete on the bar at the bottom of the screen.
2. Press the "
the channel to be deleted, and then press
the OK button.
The channel deletion confirmation window
appears.
3. Choose Yes and press the OK button.
The chosen channel is deleted.
• If you do not want to delete the chosen chan-
nel, choose NO and press the OK button.
• Perform "Installation" (see page 24) to re-
register a channel that you have deleted.
Editing a channel name
1. Press the " " / " " buttons and choose
Edit Name on the bar at the bottom of the
screen.
2. Press the "
the channel to be edited, and then press
the OK button.
The EDIT window appears.
3. Press the "
- 24 -
(information) button is pressed,
" / " " buttons and choose a
" / " " buttons and choose
" / " " buttons and choose
" / " " buttons and choose a