Typical Application Examples; Tdm(Time Division Multi); Outdoor - Samsung AE090MNYDEH Installation Manual

Typical application examples

CAUTION
• The application examples given below are for illustration purposes only.
• When the SAMSUNG Air-to-Water Heat Pump system is used in series with another heat source (e.g. gas boiler), ensure that
the return water temperature not exceed 55 °C.
• The unit is only to be used in a closed water system. Application in an open water circuit can lead to excessive corrosion of the
water piping.
• SAMSUNG can not be responsible put responsible for incorrect installations in the water system. Make sure that the boiler,
radiators, convectors, solar collectors, UFHs, FCUs, additional pumps, pipes, and controls in the water system are in accordance
with relevant local laws and regulations under the installer's responsibility.
• SAMSUNG shall not be held liable for any damage resulting from not observing this rule.
• SAMSUNG do not provide specific water system components such as Pressure relief valve, Air vent valve, buffer tank and etc.
Installers and end-users shall consider how to install the above designated components in overall water system depending on
the installation conditions. If the components are not installed in appropriate location, the water system can not be operated
as designed.
∗ The below examples are for illustration purposes only.
Application 1 : TDM(Time Division Multi)

Outdoor

Samsung Supply Range
Y joint
Outdoor unit
DHW Tank
Hydro-unit
Water Heating
Indoor
EEV Kit
Supply Header
Return Header
Radiator or FCU
Room Controller
Space
Cooling
RAC
Space
Heating
9
English