Installing the unit
Installation of the indoor unit
The indoor unit should be installed indoors and meet the following conditions.
• Installation site should be sheltered from frost.
• In area with suitable space for servicing.
• A place with adequate ventilation.
• Where there is no risk of leakage of flammable gases.
• There is a provision for condensate drain and pressure relief valve blow-off.
• The wall for installation is a flat, vertical and non-combustible wall, capable of supporting the operation weight of the unit.
Installation space
• Ensure to leave the appropriate space as indicated in the drawing.
• Installation site should be secured with adequate ventilation so that the components of hydro unit will not be damaged from
overheating.
• Before installing the indoor unit, fix the pattern sheet on the wall. This sheet has a function to take correct position for the wall
mounting bracket and screws.
14
English
300
≥350
Pattern Sheet
(Unit : mm )