Self-test mode of wired remote controller
Use of self-test mode
1 When using the self-test mode of the wired remote controller, press the [ ] and [ ] buttons for more than 3 seconds.
2 You can operate the self-test mode as follows.
• Load list: When pressing the corresponding button, you can set the load On or Off.
Enter button
(Red)
• When the water pump is turned off, the back up heater cannot be turned on.
• DHW valve, Zone #1 Valve, Zone #2 Valve and Mixing Valve cannot be turned on at the same time.
Operating part
Water pump
Booster heater
DHW valve
Zone #1 Valve
Back Up Heater 1
Back Up Heater 2
Back Up Boiler
Zone #2 Valve
Mixing Valve
LCD display
35
English