Changing The Reverb Type - Roland Atelier AT-60SL Owner's Manual

Max Max Max Max
Min Min Min Min

■ Changing the Reverb Type

By changing the reverberations of the notes, you can enjoy
the atmosphere of performance in a wide variety of different
locations. You can select from the following 11 types of
Reverb.
1.
Touch <Sound/Kbd> on the Main screen.
fig.05-08_50
The Sound/Keyboard screen appears.
2.
Touch <Effect>.
The Effect screen appears.
fig.05-17_50
3.
Touch < >< > to display the Reverb Type.
Harmony Intelligence
Chapter 5 Applying Various Effects to the Sound
4.
Touch the value setting buttons for Reverb Type
to adjust the setting.
The following screen appears.
fig.05-18_50
5.
Touch <
Display
ROOM 1
ROOM 2
ROOM 3
HALL 1
HALL 2
SMALL
CHURCH
LARGE
CHURCH
CATHEDRAL
PLATE
DELAY
PAN DELAY
NOTE
It is not possible to modify the delay time (delay interval)
when "DELAY" or "PAN DELAY" is selected.
6.
Touch <Exit>.
>< > to edit the setting.
Description
Simulates the reverb of a conference room
Simulates the reverb of a performance
lounge
Simulates the reverb of a large, open room
Simulates the reverb of a large concert hall
Simulates the reverb of a small concert hall
The reverberation of a small church
The reverberation of a large church
The reverberation of a cathedral
Applies a bright, metallic reverb
An echo-like sound repeated several times
Similarly to the above but where the
sound is panned between the left and right
speakers
131